Low profile rotary van roof ventilator for van bus caravan - Black

Low Profile Rotary Roof Vent for Vans, Wind Driven - Black

Our van roof fans set the standard for discreet, effective van roof ventilation. With incredibly slim external profiles, they fit neatly under roof racks and cargo carriers so you can ventilate without compromising your storage. 

This low profile wind-powered rotary roof ventilator for vans provides ventilation for vans, buses, ambulances, 4x4s, boats and buildings. This effective wind driven van roof vent will help beat the heat and humidity, reduce condensation and let fresh air flow through your van. This van roof vent has been designed to protrude a maximum of 72mm above the vehicle's roof and low enough to fit under most roof mounted carrying racks, the 8 vaned air scoop rotates freely while the vehicle is in motion drawing out stale air. See extraction figures below. This rotary roof vent is the perfect solution for ventilating your van.

The above image shows an inside view of the vent (left) and the inner grille (right).

Low Profile Rotary Vent for Vans - Black - features

• Discrete, low-profile van roof vent
• Tough ABS resin construction
• Cost-effective solution to the problems of excess heat and condensation in vans
• Stainless steel spindle and 2 bearings
• Internal shutter (Allows air-flow to be shut off)
• 'Bond-On' Base - no fixings required
• Ultra reliable
• No maintenance required
• Weight - 1.2kg
• Dimensions - see image below
• NOTE - this is a large vent, please see the smaller version below.
• Extraction rate - see image below
• Colour - Black (also available in white, please see below)
• 12 months warranty

Low profile roof vent fitting instructions

This low profile van vent is easy to mount - simply make a 130mm dia. hole and bond into place using suitable adhesive. Sika 552 (or similar) is recommended as it bonds well to a variety of substrates without the need of special surface pre-treatment. If other sealant adhesives are used (i.e Fastcure 2000, SEAL212FC, 221 or 252) suitable primers must be used. Recommended Sika primers: SEAL210T & SEAL215. No mechanical fixings are required.